Allow Sharp Corner on a Sweep

Allow Sharp Corner on a Sweep

If you have a Sweep who's path contains sharp corners and it doesn't give you the sharp turn-around on the path you want, right-click the Sweep at the IntelliShape level and select "Allow Sweep Sharp Corner" to allow the sharp corners on the sweep.

    • Related Articles

    • Add Closed Corner on Sheet Metal Not Working on Both Sides of a Bend

      There is a known issue in sheet metal with the Add Closed Corner tool where the Closed corner will not work on both sides of a bend in certain cases. Typically you will find that you either cannot select the other side of the bend, get a message that ...

    • Double Quote in a part or file name causing save to fail

      If you have a single part in the Scene that has a double quote in the part name and you hit Save, the default file name will match the part name. Since Windows doesn't allow quotes in file names it will fail to save. The same thing will happen if you ...

    • Can’t convert to sheet metal part due to spline faces

      If you have imported a part and are trying to convert it to a sheet metal part and it is failing, one possibility is the bend faces are spline surfaces. You can test this by trying to apply a Radial SmartDimension to the face, if it fails you know ...

    • How to open Package Builder content in Google Chrome

      A Chrome Extension called IE Tab allows you to run the IE engine inside of Chrome: Some instructions: https://productforums.google.com/forum/#!topic/chrome/XfzoEeDojqg The extension: ...

    • DRAFT Print Issue

      If a customer reports an issue on print in DRAFT that the line lengths do not measure correctly, we will recommend them to use the Print Calibration tool. When they use the tool: When inputting the values, use the largest print difference the printer ...