Bad facets on a part
If you have a part that has bad facets, something like this:
To fix: Right-click the part, go to Part Properties, Rendering and turn on Triangulated mesh.
Related Articles
Green highlights that won't go away, how to remove them
Once and a while you might find some green highlights left on the screen from selections previously made and they will not go away. To remove them, go to the Tools ribbon bar and click Recreate Display, that should refresh the graphics and remove the ...How do I copy an IntelliShape from one part to another?
Drag and drop the IntelliShape into a Catalog then drag and drop it from the Catalog onto the other part. Miscellaneous graphics problems on systems with “low end” video cards. If you find the graphics performance/interaction unacceptable, try ...Add Notes to a part with IronCAD Mechanical
With the IronCAD Mechanical addon you can add Notes to parts. Drag and drop the "Add Post-It Note" catalog item onto a part. Add your Note and click OK. Then you will see a Note symbol on the part. You can right-click the part to open the Note.How to access Structured Part mode in version 2022?
In IRONCAD 2022, the Structured Part Ribbon was not enabled by default. Use the Customize Ribbon Command to add the Structured Part commands to the Ribbon Bar. Video Attached to show the process.How to measure around the perimeter of a part
If you want to measure around the perimeter of a part such as, for example, a Slot shape, you can use the Measurement Command's Curve Measurement option. Start the Measurement command, click Curve Measurement and Shift-Select all the part edges that ...