SprutCAM Add-in Setup

SprutCAM Add-in Setup

After installing SprutCAM:

1. Go to the SprutCAM Addin manager

2. Select IRONCAD and click the Enable toggle.

3. Open IronCAD, Go to Add-ins, Click Add-in Applications.

4. Toggle on Sprut Technology, OK.

You'll see a SprutCAM entry in the Add-ins ribbon bar , the button is blank but it does work.

    • Related Articles

    • Add Closed Corner on Sheet Metal Not Working on Both Sides of a Bend

      There is a known issue in sheet metal with the Add Closed Corner tool where the Closed corner will not work on both sides of a bend in certain cases. Typically you will find that you either cannot select the other side of the bend, get a message that ...

    • How to add a color to a Catalog?

      Use the Fill EyeDropper tool from the Visualization tab to “grab” a color off a part and drop it into a Catalog. Note: Right-click when dropping into the catalog for additional options like Smart Paint Color only or Smart Paint Color and Materials ...

    • How to setup a transparent background in a exported rendered image file

      Go to File->Export Image. Select Tif or PNG from the file type list and give your file a name. In the resulting dialog after you hit save, input the correct image size (refer to the size of your scene in the status bar to keep a good aspect ratio), ...

    • How to get KeyShot to run standalone

      This is for when you have KeyShot 6 and only IronCAD 2017 installed. Currently with this setup KeyShot won't startup standalone but will startup if launched from within IronCAD. To fix this: Go to the Windows Control Panel, System, Advanced system ...

    • How to measure around the perimeter of a part

      If you want to measure around the perimeter of a part such as, for example, a Slot shape, you can use the Measurement Command's Curve Measurement option. Start the Measurement command, click Curve Measurement and Shift-Select all the part edges that ...